高输出功率小交流电校正仪（耐弧光校正仪）-（计算方式机把控）

High voltage low current tester (arc resistance tester) - (computer control)

的产产品名字：耐电弧试验机

Product name: electric arc resistance tester

设备类型：NDH-A

Product model: NDH - A

实现标：GB/T 1411-2002《固态物体绝缘电阻用料耐高降低电流值弧光蓄电池放电的耐压试验》（相等IEC  61621-1997）及ASTM D495等要的要方案制作业的，并具备IEC 149、UL 746A等检验的办法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

常见适用人群的范围及功用：

本经过多次实验发现机是决定适用直流无刷电机、电气和家庭工厂用电气等业的水电工用氟橡胶、聚酯树酯胶和耐压漆等耐压的原素材的耐电孤机械耐腐蚀性认定，主适用混合物耐压的原素材如：氟橡胶、塑料薄膜、聚酯树酯、白云母、陶瓷厂家、磨砂玻璃、耐压油、耐压漆、瓦楞纸板等有机溶剂的耐电孤机械耐腐蚀性测式；

本试验报告机由计算公式机保持启用，会显视当下测试操作程序及测试操作时光，测试操作开始和结束后并导出当下测试操作大数据，并可打印纸.标准规定实验报告格式报告格式。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为横竖一身形式，中下部为实际操作设备，上半部为实验设计箱。

2 本厂品所采用*新智力控住新技术，实现取舍编译程序（IEC或ASTM）可自动化实行可靠性试验，并在手提苹果电脑现示试验台具体步骤和但是。

3 **功效优秀，抗干扰信号专业能力强，试验导致精性强。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断的时间确定误差：乘以 ±10ms

2 调压器发热量：2kVA

3 功率试验装置电压值：12.5kV

4 实验设计电流电压计算精度：±3%

5 电流值的控制精准度：±10%  瞬时电流在测量精确：1.5%

6 参比电极对坯料气压：（0.5±0.05）N

7 电极片建材：钨棒

8 工业的距离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 选择区域室温：（23±2）℃

10 施用工作环境室内温度：（50±5）%

11 电源线：220V±5%  50Hz  10A

12 试验台    做法：   新国标/美标/10 mA 接连/20 mA 陆续/30 mA接连/40 mA不间断

13 冲击试验系统程序如表：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 成品形号：

NDH-A    耐电弧焊接疲劳试验仪-微机把控

NDH-B    耐电弧放电可靠性试验仪-触感屏的控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！